|
Right Click on the picture below to copy it.
Want more directions? How
to this Send Drawing  All we need is the centerline dimensions and
how out of plumb or level the walls and curbs are. We'll figure
the glass and header sizes.These showers and more can be seen at our gallery of showers, www.glasss.com. |
When you buy a Neo-Angle from
us we cut the header to size and install the top pivot for
you. Then we take it apart and ship it to you.
I used to think NEO-Angle Showers were the most difficult.
Now I think they are one of the easiest. This is mainly
due to the prep work we do for you. To install the door
only four holes need to be drilled in the tile. Kicking
the panels around to get everything to line up takes a little
bit of time but there's just not that many parts to install. |
Neo - 1058
We also supply the big heavy duty brass corner clips and
wall mount brackets. The clips normally supplied with the
header should be thrown away. Pictures on Header's
Page |

1056 Egly"s Custom
Neo-Angle with full height side panels |
Kit Contents:
Tube of mildew resistant silicone, 6" long #2 Phillips
bit, 1" #3 Phillips and a can of glass cleaner. We also
supply stainless screws and anchors and clear plastic setting
blocks to adjust the height of the side panels.See also Neo Angles without
Headers. |