You can't mount the hardware directly on drywall.
If the drywall crushes, then the hanger will tilt and the
roller will hit the hanger.
If you install two wood screws into the drywall so that the
heads are flush with the drywall, then the weight of the doors
and stainless steel will not crush the drywall.
Possibly a better alternative would be to cut a section of
closet pole and using a hole saw cut out the drywall and replace
it with the section of closet pole which you just cut to the
thickness of the drywall. The screw system is easier.
|
This
elegant attractive hardware is becoming more popular
all the time, especially since the prices dropped
so dramatically.
and
Hours:
M-F: 7 to 4:30 and Sat: 10 to 2 PST