SAVE $100's with our

Only for pickup in Berkeley, California.

Need side panels? Call 866-370-0006 for a quote.

We have these doors drilled for either a 6" Handle on both sides, or a 6" Handle on the inside and an 18" towel bar on the outside. They come in 3/8" glass.

The pivot notches will work for use with a header or with a very cool wall mount bracket. They will work in many Neo-Angle showers so long as you can fit a 28" door in the right spot.

Clearance, as usual, is 3/16" on each side.

Finishes on metal include but are not limited to: Satin-24K-Gold, Satin-Brass, Satin-Chrome, Satine, Satin-Nickel, Polished Chrome, Polished Brass, Lifetime Brass, Antique Brass, Polished Nickel, Black Nickel, 24K Gold, Antique Copper, Oil Rubbed Bronze, Brushed Pewter, Gloss White, Matte Nickel, Gloss Black, Red, Naked Brass (no clear coat), Verdi Brass (green tarnished).

This picture shows the pivot with wall mount bracket adapter.

Choose any 6 inch shower door handle or any shower door handle/towel bar combo that fits your door of choice [check the inventory page if you aren't sure]. Keep in mind that an ill-placed towel bar can knock a hole into your wall (if for some reason the perfect door for you has drilled holes for the towel bar you can't use, then we've got a little cap for that too).

Doors are 75 3/16" tall, which is the right size for a header, the top of which would be at 77" off the curb. The width is 28". So if you want to build your opening to fit the door, the optimum size is 28 3/8" wide by 76 1/16" (if you want to mount the pivot on the ceiling) or greater than 77" (if you want to use a header or wall mount bracket.)

When you buy the glass and hardware we include installation supplies: glass and tile drill bit, screws, anchors, screw driver tips, glass cleaner, shims, instructions (of sorts), and much more.