Dimensions
of the Double Mortise Roller - This Version has large
spacer, which we've replaced with small spacer. However
if you have an unusually thick door, this might work well.
Floor Guide is stainless and has a roller on a bushing.
The roller is 1/2" Diameter x 1/2" tall.
I recommend 9/16" to 5/8" Wide rabbit and 1/2"
deep. We have a modification for carpeted floors.
If you want the safety pin then you would need either the
GD-02A or GD-03A. The GD03A gets the door a little closer
to the wall.
The track comes predrilled and you need blocking behind the
sheet rock.
If you use the LS102 we have in stock then you do not need
drilled track. You can position these to hit your studs. There
is another version which hangs the track 3/8" further
form the wall.
Stops YM-XW-02
toll free: 866-370-0006 ext 202
Ceiling Mt. Hanger will also work with the Double Mortise
Roller.
There are four types of ceiling mount hangers.
We accept credit cards, and
Wilson Glass toll free: 866-370-0006 Hours:
M-F: 8 to 4:30 and Sat: By appointment only Read our Privacy and Return Policy
and
Hours:
M-F: 8 to 4:30 and Sat: By appointment only
1.
SHOWER DOORS
Double
Mortise 
Dimensions
Drawing with Safety Pin and Drilled Track and GD-03A Hangers
