The Door can close against the wall, against
the end panel or two doors at the corner.
We can also supply glass. One stop complete Do-It-Yourself
Kit, guaranteed to fit your dimensions.
Instructions
for Installing
Notes on the Corner Double Door: Paul Kana
in Texas very patiently waited for us to figure out how to
make the corner shower with two doors work. The manufacturer
couldn't give us accurate information or even the correct
parts for a couple of months. Finally, as you can see from
the photo above, the project went together without a hitch
and he says, it works very well.
Lead time is about 2 weeks now and in some cases these are
in stock. To make the corner shower, two 60" kits must
be orders and a corner.
Glass Thickness Range: 5/16 to 3/8 inch
(8 to 10 millimeter) Tempered Safety Glass
Maximum Door Weight: 88 pounds (40 kilograms)
Fabrication: 2 - 3/4" Holes required
in fixed panel and door
Hydroslide Kits come in four finishes; Chrome Fittings with
a Brite Anodized Sliding track, polished Brass with a Brite
Gold Anodized Sliding track, Brushed Nickel with Brushed Nickel
Anodized Sliding Track, and Oil Rubbed Bronze Anodized Sliding
Track.
Each Kit comes with complete fabrication
and installation instructions. 180 Degree Standard Kit consists
of: One Sliding Glass Door Upper Track, Two Hangers for Sliding
Glass Door, Two Sliding Glass Door Rollers, Two Sliding Glass
Door Roller Stops, One Sliding Glass Door Floor Guide, Two
90 Degree Wall-to-Upper Track Connectors, Two 180 Degree Glass-to-Sliding
Track Connectors.
Also required is the U-Channel for the bottom of the fixed
panel, and a threshold which should run the full width of
the opening. |
and
Hours:
M-F: 7 to 4:30 and Sat: 10 to 2 PST