The doors can't accidentally fall off the track because of
the anti-rocking pin.
"Hi Dave, My boyfriend and I came into your store a few weeks ago and bought the hardware for the new door. ...We hung the door yesterday and I am super excited and wanted to share with you.
Yours truly,
Kris McClain"
Floor Guide is stainless and has a roller.
The roller is 1/2" Diameter x 1/2" tall.
I recommend 5/8" Wide rabbit and 1/2" deep.
Wall Mount Bracket for drilled track.
YM-LJ-02A
DRILLED OR UNDRILLED TRACK
The
Anti-Rocking Pin requires a track that is drilled for the track mounting screws. Drilling the track is possible but it's tricky to get the holes lined up. We have pre-drilled track. But pre-drilled track required backing behind the sheet rock because the holes in the track will not line up with your studs.
Preparing the Wall:
The Track hangers also should not be mounted onto drywall.
The drywall may crush and the hanger will tilt causing problems. There are several easy solutions 1. Substitute cement board for drywall. 2. Use a hole saw to remove the sheet rock underneath the
hangers only and replace the sheet rock with circle of plywood
or section of closet pole. 3. Drill your own holes
in the track 4. Remove
the anti-rocking pin and use under mount hangers which will
allow placement anywhere. An additional spacer
has to be added to the roller. 5. Use
the laguna rollers which will allow the door itself to come close to the bottom
of the hangers and keep it from rocking off the track.
Ceiling Mt. Hanger will also work with YM-21
There is also a Ceiling Mount Hanger for Bypassing Double
Doors.
toll free: 866-370-0006 ext 202
We accept credit cards, and
Wilson Glass toll free: 866-370-0006
Hours:
M-F: 7 to 4:30 and Sat: 10 to 2 PST Read our Privacy and Return Policy
YM-21
"Hi Dave,
My boyfriend and I came into your store a few weeks ago and bought the hardware for the new door. ...We hung the door yesterday and I am super excited and wanted to share with you. 
and
Hours:
M-F: 7 to 4:30 and Sat: 10 to 2 PST